STM Integrated stepper motor



STM57 series integrated screw stepper motor



  Integrated digital input and output                                                             

  Support online upgrades and multi-platform development                       
 · Localized digital input and output, making the controller easier and         simpler
 · Can be connected to a variety of signal type sensors, such as:                     photoelectric switch, proximity sensor, Hall sensor, etc.
 · Can be flexibly configured to complete different functions as needed: left     limit, right limit, zero switch, etc.                     

 
  
 

· Convenient maintenance, development according to user needs,      online upgrade without returning to the factory
 · Provide multiple platform development cases to make any control so simple
  ·Support secondary development such as LabVIEW and C++

 
  







 

  Complete diagnostic alarm function   simple design


 
 ·Integrated stepper motor power-on self-test diagnosis, timely discover hardware failure, avoid shadow
    Ring system operation
  ·Equipped with a variety of safety protection functions, visually display the motor through LED flashing alarm
    Current state
  ·Protection functions such as overvoltage, undervoltage, overheating, overcurrent, and stall alarm
  ·Support for current and historical alarms
 
 

 
  ·Only 2cm is added to the standard motor shape
   ·Compact structure, high efficiency and small size
   ·Saves installation space
   ·Integrated and simple design, a variety of protective devices, safe and reliable             
  





 



  Input voltage                                  Control interface

  ·10VDC~36VDC                                       
                        
  ·Support 5VDC, 24VDC, common anode connection
   ·Support direction signal, pulse signal, offline signal
   ·Photocoupler isolation
 
 
  Digital input and output   Protection
  · Configurable 3 digital inputs, 1 digital output
   · High level 5VDC~3VDC, low level 0VDC~2VDC
   · Maximum open drain output 100mA
  · Support over-voltage, under-voltage, over-heat, over-current, and other protection functions
 
  Downtime current    Running current
  ·Automatic semi-flow (configurable)   · Peak 4A, adjustable using 0.5-4A
 
  PWM input frequency   Use environment
  ·≤250KHz   · Temperature 0 °C ~ 40 °C
   · Relative humidity 10% RH ~ 85% RH
   · No condensation, no corrosive gas, no flammable gas, no conductive ash
     Dust and no oil mist




 Stroke 60mm  STM5765A-*-1B2.54L60SNS STM5765-*-1B2.54L60SNS
 Rated current A 4
 Step angle 1.8
 Phase 2
 Body length(mm) 85
 Screw outer diameter 9.525
 Lead(mm) 2.54
 Screw surface layer S=Uncoated
 End processing N=No processing
 Nut type C=Customer settings
 Standard screw accuracy (linear accuracy) 0.18mm/300mm
 Screw straightness 0.2mm/300mm
 Integrated encoder YES NO
 Load (thrust) 910N 910N
 Dimensions) see picture 1 see picture 2




 Stroke 130mm  STM5765A-*-1B2.54L60SNS  STM5765-*-1B2.54L60SNS
 Rated current A 4
 Step angle 1.8
 Phase 2
 Body length(mm) 85
 Screw outer diameter 9.525
 Lead(mm) 2.54
 Screw surface layer S=Uncoated
 End processing N=No processing
 Nut type C=Customer settings
 Standard screw accuracy (linear accuracy) 0.18mm/300mm
 Screw straightness 0.2mm/300mm
 Integrated encoder YES NO
 Load (thrust) 910N 910N
 Dimensions see picture 1 see picture 2

Note: * indicates support for CAN/CANopen bus, RS-485 communication method

 


 
 







 

Click to buy


?
XML 地图 | Sitemap 地图