STM Integrated stepper motor



STM42  Integrated stepper motor
  Closed loop / open loop control                                                                    Integrated drive and controller



  ·Closed loop control mode prevents out-of-synchronization
  ·Support stall detection and out-of-step compensation
  ·Automatically adjust the current output according to the load to               reduce the motor temperature rise
  · Maintain a stable position after positioning, no oscillation
  ·Open loop control, low speed mute control, low vibration






 





 

  · Integrated drive supports up to 10A current, natural cooling
  ·Maximum support for 128 subdivisions, more precise control
  ·Open parameters for users to debug
  ·Support software limit function
  ·Support position mode, speed mode, OPR mode
  ·Internally realize motor speed curve planning, equipment running       more smoothly                          

 


 
  Integrated high precision encoder     Efficient origin return and setting
 

   ·Internal integrated high resolution absolute encoder
   · Know the current absolute position when powering up
   ·Can choose angle feedback or pulse number feedback
   ·It can be flexibly set to prohibit the entry range, so that the zero
    return direction avoids the restricted area and controls
    Simpler
 

 
 ·Recover the origin return at high speed without the origin sensor
   ·Save wiring and can be used in situations where sensors cannot be installed
   · Can be manually moved to any position to set the origin
   · Support multiple origin return methods, flexible configuration

 
 
  Integrated digital input and output    Support online upgrades and multi-platform development 


   · Localized digital input and output, making the controller easier
     and simpler
   · Can be connected to a variety of signal type sensors, such
     as: photoelectric switch, proximity sensor, Hall   sensor, etc.
   · Can be flexibly configured to complete different functions as
     needed: left limit, right limit, zero switch, etc.                     


 
  
 · Convenient maintenance, development according to user needs,
    online upgrade without returning to the        factory
   · Provide multiple platform development cases to make any control
     so simple
   ·Support secondary development such as LabVIEW and C++                                                                        

 
  








 
  Complete diagnostic alarm function    simple design


  ·Integrated stepper motor power-on self-test diagnosis,
   timely discover hardware failure, avoid shadow Ring
    system operation
  ·Equipped with a variety of safety protection functions,
   visually display the motor through LED flashing alarm
Current state
   ·Protection functions such as overvoltage, undervoltage
    ,  overheating, overcurrent, and stall alarm
   ·Support for current and historical alarms
 
 
  ·Only 2cm is added to the standard motor shape
   ·Compact structure, high efficiency and small size
   ·Saves installation space
   ·Integrated and simple design, a variety of protective devices, safe and reliable                   
 








 
 
  Input voltage   Current
  ·10VDC~36VDC    ·Flexible configuration according to the rated current of the motor
 
  Digital input and output   Network control
  · Configurable 5 digital inputs, 2 digital outputs
  · High level 3VDC~3.3VDC, low level 0VDC~0.5VDC
  ·Optional CAN/CANOPEN, RS-485 ,RS232communication method
 
  Control mode   Subdivision
  ·Position mode, speed mode, origin  return mode   ·Maximum 16 subdivision (closed loop control) or maximum 128 subdivision (open loop control)
 
  Use environment   Fault alarm function
  ·Temperature 0 °C ~ 40 °C
  ·Relative humidity 10% RH ~ 85% RH
  ·No condensation, no corrosive gas, no flammable gas,
   no conductive  ash
   Dust and no oil mist
  ·Support over-voltage, under-voltage, over-heat, over-current
   ,blocking and other protection functions
  · Can query current alarms and historical alarms
  · Support fail-safe mode
  · Rich self-diagnosis function






  model               Rated current (A) Holding torque (N·m) Step angle (°) Phase Body length X (mm) Integrated encoder  Weight (kg)
  STM4228A-* 0.6 0.12 1.8 2Phase 46.5 0.19
  STM4228-* ×
  STM4234A-* 1.3 0.28 1.8 2Phase 52.5 0.29
  STM4234-* ×
  STM4240A-* 1.7 0.40 1.8 2Phase 58.5 0.34
  STM4240-* ×
  STM4248A-* 1.7 0.50 1.8 2Phase 66.5 0.41
  STM4248-* ×
  STM4260A-* 2.0 0.70 1.8 2Phase 78.5 0.52
  STM4260-* ×

Note: * indicates support for CAN/CANopen bus, RS-485, RS-232 communication mode

 


Click to buy


 
XML 地图 | Sitemap 地图